2pcs 1790mm Bandsaw Blade *9.5*0.35mm for 10" Band Saw
- Material: SK5 Carbon Spring Steel
- Length: mm
- Width: 6.35 mm
- Thickness: 0.35 mm
- TPI : 6, 10, 14.
Suitable for:- Scheppach 10" bandsaw HBS250 & HBS261
Craftsman 10 bandsaw 921400
Axminster AWHBS AWHBS250N
- Record Power BS250
- Fox F28-186A
- Sabre 250
- Suitable for most bandsaws which use 70-1/2" long, 1/2" wide bandsaw blade
Alternate set of tooth allows clearance for the blade body,reduces friction.
welding technology and smoother welding point.
Bandsaw Blade Maintenance Tips:
1. Check bearings,bandsaw pullys and drive belts at every blade change to ensure they are able to move freely.
1.1 Spray on vegetable oil can be used to lubricate the bearings if they are not moving smoothly.
1.2 For pulleys, check for proper alignment, tension, and wear, adjust as needed, and if damaged, replace them.
1.3 Check the belts for a secure fit and for signs of wear.
Then, using an air compressor, blow out all of the sawdust that has fallen inside the band saw.
2. The Break-In Period
Wear it down a bit before using a new blade. Otherwise,the consequences can be broken teeth. This can be done by reducing the speed to half of what is normal and reducing the feed quantity. Come back to normal speed after 3~5 cuts. This will wear down the extra sharpness of the teeth, making the blade more durable.
3. Lubrication Is Key
When it comes to cutting metal with your band saw, lubrication is a must. No matter what type of material you are cutting, never use water as a lubricant.
4. Release Blade Tension
Blade tension must be released when not in use. This shrinking can cause tiny cracks in your blade if it is always under tension.
5. Sharpen Your Blade
To get a better cutting with your blade, it is important to

• Package Dimensions ‏ : ‎ 0.39 x 0.39 x 0.39 inches; 1.76 ounces
• Department ‏ : ‎ unisex_x001f_adult
• Date First Available ‏ : ‎ April 19, 2025
• Manufacturer ‏ : ‎ VGHDXXNNHA
• Country of Origin ‏ : ‎ China